¡¡ ¡¡ ¡¡ ¡¡ ¡¡ ¡¡ ¡¡
English
¡¡ ¡¡ ¡¡ ¡¡ ¡¡ ¡¡ ¡¡ ¡¡ ¡¡ ¡¡
¡¡
¡¡ ¡¡
 
Product Information
Your Position £ºProduct
¡¡
¡¡ ¡¡
- Voltage detector IC ¡¡
- Reset IC ¡¡
¡¡
- Li+ Battery Charger IC
- Coin Battery Charger IC
- LA Battery Charger IC
- LiFePO4 Battery Charger IC
- Solar Panel-Powered Charger IC
- NIMH Battery Charger IC
- Li+ Titanate Battery Charger IC
¡¡
- WLED Driver
¡¡
- DC-DC Converter
¡¡
- LDO
¡¡
- Amplifiers
¡¡
CN3066
1A Lithium Battery Charger
Product Profile
    Reference articles
¡¡
General Description£º
The CN3066 is a complete constant-current /constant voltage linear charger for single cell lithium rechargeable
battery. The device contains an on-chip power MOSFET and eliminates the need for the external current sense
resistor and blocking diode. Furthermore, the CN3066 is specifically designed to work within USB power
specifications. Its low external component count makes CN3066 ideally suited for portable applications.
Thermal feedback regulates the charge current to limit the die temperature during high power operation or high
ambient temperature. The regulation voltage is internally fixed at 4.2V, it can also be adjusted with an external
resistor. The charge current can be programmed externally with a single resistor. When the input supply (wall
adapter or USB supply) is removed, the CN3066 automatically enters a low power sleep mode, dropping the
battery drain current to less than 3uA. Other features include under-voltage lockout, automatic recharge battery,
temperature sensing and charging/termination indicator.
The CN3066 is available in a thermally enhanced 8-pin DFN package.
¡¡
Applications£º
Mobile Phones Digital Still Cameras
MP4 Players Electronic Dictionary
Portable Devices Variety Of Chargers
¡¡
Features£º
Charges Single Cell Li-Ion Batteries Directly from USB Port or AC Adaptor
Input Voltage Range From 4.35V to 6V
On-chip Power MOSFET
No external Blocking Diode or Current Sense Resistors Required
Constant Charge Voltage 4.2V, and also can be adjustable by an external resistor
Precharge Conditioning for Reviving Deeply Discharged Cells and Minimizing Heat Dissipation During Initial Stage
¡¡ of Charge
Continuous Programmable Charge Current Up to 1A
Constant-Current/Constant-Voltage/Constant-Temp Operation with Thermal Regulation to Maximize Charge Rate
¡¡ Without Risk of Overheating
Automatic Low-Power Sleep Mode When Input Supply Voltage is Removed
Status Indication for LEDs or uP Interface
C/10 Charge Termination
Automatic Recharge
Battery Temperature Sensing
Available in DFN-8 Package
Pb-free Available
¡¡
¡¡
Copyright©2019-2020 Shanghai Consonance Electronics Incorporated. All rights reserved.